Kitchen countertops are prone to maximum wear and tear. Rough use, oil leaks, cutting and chopping of vegetables and...
Cleaning Tips on How To Clean and Seal Shower Glass Door
Do you feel you have been spending a lot of your productive hours only on cleaning your glass shower doors? Many homemakers have been complaining of this tedious task and the common issue is that regardless of how much time they put in cleaning, the glass doors become dirty with the next use. In this article, we will throw light on tips for cleaning glass shower doors to achieve long-lasting results.
Why does Shower Glass get Dirty?
- Calcium and magnesium minerals present in hard water leave a whitish mark once the water evaporates. These hard water stains make the glass dirty.
- Shower glass gets dirty by soap scum formed due to hard water mixing with soap. Soap scum reduces the aesthetic beauty of your surfaces. It is a thin coating made up of fungal hyphae, which grows in warm and damp places.
- Glass also gets etched due to acidic cleaners. Etched glass surfaces are porous and they allow hard water minerals to seep into their pores over time, leading to corrosion.
- The areas where the shower glass meets the door frame or wall tile is always damp and attracts mold and mildew breeding.
Tips for Cleaning Glass Shower Doors:
Cleaning Tips if your Glass is New
If you have newly installed a shower glass, then some tips will help you maintain it like new always. Do not use acidic cleaners and only buy products with a high PH balance, i.e., which are alkaline. To clean soap scum off glass shower doors, there are many products available at Big Box Stores, but not all are that efficient and effective. Do not get lured by fancy offers and discounts. Only cleaning cannot guarantee that stains will not occur again. You need to use a shower glass protector – Valore Sealer, which can form a protective seal on the glass surface. You can maintain your glass using Valore Maintenance, which acts as a fresh cleaner for weekly maintenance jobs.
Cleaning Tips if your Glass is Old or Damaged
If your shower glass is already damaged with etching and hard water stains, then don’t worry! You can restore it like new. You need to first clean your shower glass with a shower cleaner -Benaz, to remove all the hard water dots and soap scum. After the glass is dry, seal the surface with a shower glass protector – Valore Sealer to prevent further staining. Use a squeegee to clean the glass with a cleaner as this helps to spread the liquid uniformly. It also helps to retract the remnants revealing a clear glass surface below. Keep up the weekly cleaning regimen using Valore Maintenance, which also helps to preserve the natural beauty of the glass.
pFOkUS manufactures some revolutionary products to clean and seal shower glass. Our products have been manufactured after years of research in the laboratories. Here is how you can use our products to clean your surfaces.
Cleaning with Benaz:
Benaz is our powerful glass cleaner. It removes all the etching and water stains efficiently. You need to apply Benaz to the applicator and rub it gently over the etched and stained glass surface. Gently massage the surface for 2 to 5 minutes and wipe clean with a dry cloth. You will find a clear and clean surface below.
Sealing with Valore Glass Sealant:
In order to keep water stains off glass shower doors, we have manufactured Valore Sealer – our incredible glass sealer. It forms a protective layer on the glass, thereby preventing hard water stains and soap scum from forming. After your glass is clean and dry, you need to apply a coat of Valore by spraying it on the surface. Next, just wipe it with a soft and clean cloth. You will find a sparkling surface below and the sealer would have formed a protective layer on your glass, which will make the water sheet off the surface.
Maintaining the cleanliness and sheen of your glass door with Valore Maintenance:
Valore Maintenance is our combination of glass sealer and cleaner suitable for shower glass maintenance. It prevents water dots, corrosion and soap scum from forming on the glass. Valore Maintenance has been made with Repela – Technology that efficiently cleans and seals at the same time. Its molecular invisible bonding chemicals attach to all the fixtures, glass and such others preventing the formation of any stains or dots. It makes your weekly maintenance tasks easier and effortless. Use Valore Maintenance by spraying it on the glass surface. Next, wipe clean with a soft cloth to get a clean and shining surface below. It can be used on a weekly basis to remove the superficial dirt and grime accumulated on the surface.
Follow these tips for cleaning glass shower doors. If you want to clean and seal the shower glass door effectively, grab our products and preserve the beauty of your surfaces for long.