Benaz Specifications & Characteristics

Product Name:

Benaz

Product Type:

Cleaner and polisher to remove – water dots or spots, water spot etching, lime scale, mineral stains, rust, overspray from paint, mold, mildew and soap scum

Safety Precautions and PPE: 

Safety should always be the number one priority. Before applying Benaz you should always wear the correct PPE.

 

 

 Dwell Times and Reapplication:

Once applied reacts in	:	< 1 second
Product quits working after	:	5 minutes of dwell time.
Re-apply product	:	If more applications are needed – apply immediately.

Expected Time of  water spot Re-occurrence:

Will vary depending on the surface, type of area, surface wear, moisture, and amount of water that come in contact with the surface.

Infected area sealed and maintained with pFOkUS’ Valore

:

3-7 years

Valore glass sealant >

Cleaning Products that work with Benaz:

Sometimes mineral deposit residue maybe on the surfaces and dense, Zido can be used to remove any heavy calcium and efflorscence.
Zido mineral remover >

Applicable Temperatures:

Apply Benaz between temperatures of 34° F ­ 97° F (1° C ­ 36° C).

Coverage:

Will vary depending on the surface, type of area.

Handling & Storage:

Close container tightly after each use and store locked away in the original container only.

Store between temperatures of 34° F ­ 97° F (1° C ­ 36° C).

Shelf Life:

3 years.

Cleaning of Equipment:

Clean all applicators, tools and hands with soap and water immediately after use.

General Surface Prep:

Always perform a test areas before applying over the entire surface. Protect all surfaces. Remove all bulk efflorescence off the surface with Zido, if needed. Apply Benaz and massage the surface. Wash surface with water or dry buff to remove all residue.
Benaz Directions >

Approved Surfaces:

We have an entire page listed with the approved surfaces and how Benaz is applied on each surface.
Shower glass polishing video >
Benaz approved surfaces >