fbpx

Zido Specifications

With Zido, we completely reinvented the formula. Your surface lives on, beautifully laid stone, tile, grout and brick will be restored at another level. Advanced chemicals like our new cherry fragrance gives you a new fresh scent. Which all adds up to a healthier restoration life. Zido – It’s everything an efflorescence removal product should be.

Zido Specifications & Characteristics

Product Name:

Zido

Product Type:

Efflorescence and calcium remover.

Safety Precautions and PPE: 

Safety should always be the number one priority. Before applying Zido you should always wear the correct PPE.

 Dwell Times and Reapplication:

Once applied reacts in : < 1 second
Product quits working after : 10 minutes Zido is usually at a neutral state.
Re-apply product : If a more applications are needed – 5 minute intervals.

Expected Time of Efflorescence Re-occurrence:

Will vary depending on the surface, type of area, surface wear, moisture, and amount of water that come in contact with the surface.

If infected area is not sealed after Zido application : 1-2 years
Infected area sealed with pFOkUS’ – Celine or Caponi : 3-7 years

Celine waterproof clear sealant >
Caponi grout & mortar sealant >
Cleaning Products that work with Efflorescence:

Sometimes mineral deposit residue may still about on surfaces that are very dense, Benaz can be used to remove any left over residue. Such surfaces include glass, tile, granite, aluminum and more.
Benaz mineral remover >

Applicable Temperatures:

Apply Zido between temperatures of 34° F ­ 97° F (1° C ­ 36° C)

Coverage:

Will vary depending on the surface, type of area, amount of efflorescence on the surface and depth of efflorescence within the surface.

Handling & Storage:

Close container tightly after each use and store locked away in the original container only.

Store between temperatures of 34° F ­ 97° F (1° C ­ 36° C)

Shelf Life:

10 years

Cleaning of Equipment:

Clean all applicators, tools and hands with soap and water immediately after use. Read all specs in the SDS sheet.

General Surface Prep:

Protect all surfaces. Remove all bulk efflorescence off the surface. Apply Zido. Wash surface with water removing all residue. Zido Directions >

Approved Surfaces:

We have an entire page listed with the approved surfaces and how Zido is applied on each surface.
Approved Surfaces >

Approved Areas:

We have an entire page listed with the approved areas and how Zido is applied in each one of the areas.
Approved Areas >

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

Sending

©2020 pFOkUS® - All Rights Reserved

Log in with your credentials

Forgot your details?