DS104 Frameless Shower Door Seal Replacement.
- 98″ long (8 feet long) for 3/16″ thru 1/2” glass.
- Comes pre-taped or the seal adheres with our DS200 double sided tape sold separate.
- Can be used on both hinge side and between the glass shower door and side panel.
- The 90 degree angle DS104 frameless shower door seal helps prevent water from escaping gaps between the door.
The rigid fin adheres to
the glass & soft fin seals.
The image to the left was taken at the top of the shower door, displaying how DS104 frameless shower door seal can be used on the back of the glass shower door. Once the door is shut the soft fin deflect the water not allowing it to escape.
More shower door seals >
Glass shower door
double sided tape?
DS200 is a very high adhesive double sided tape to bond shower door side seals to the glass. Inexpensive imported tapes don’t compare to DS200. We highly recommend purchasing our pre-taped seals for the ease of use.
Buy DS200 $23.99>
Removing water
spots shower glass.
Benaz is formulated by pFOkUS to remove all hard water spots and etching. With jsut a little elbow grease or using a small buffer, your glass will look new in no time at all.
Benaz water spot remover >
Benaz glass polishing video >
Buy Benaz >
Sealing shower glass at
a hydrophobic level.
Valore is an equistely designed cleaner and sealer for shower glass, preventing water spots and etching. If water spots or etching is currently present on your shower glass use Benaz to restore the glass before applying Valore. Your shower glass deserves a little Valore love.
Valore glass sealant >
How to seal glass video >
Buy Valore sealer >
Questions about DS104?
Here are our answers.
How do I clean the glass edge before installing the side seal?
Simply use the pFOkUS cleaning pad that is included with every seal. We recommend sealing the glass afterwards with Valore. Glass sealer >
Is the pre-taped seal easier to install than the double side tape?
Most defiantly the pre-taped is easier to install on the shower door.
Pre-taped shower door seals >
How do I cut my sweep to fit my door?
Scissors or a box cutter knife will work just fine.
If calcium build-up is present on my shower door, how do I remove it?
The calcium build-up on your glass can cause issues installing your sweep.
Remove all the calcium with Benaz. Water spot remover >
How long should my seal last?
Depending on hard water and tiles with lippage – most sweeps should be replaced every couple years. Also depending if all oils are removed (with the pFOkUS pad that is included) before installation.
How do I know my glass size?
We have a directions and pictures on how to measure. Glass measuring >
Follow Us!