DS9397 Frameless Shower Door Seal our T-shape glass door side seal.
- 98″ long (8 feet long) for 3/16″ thru 1/2” glass.
- Adheres to the glass with our DS200 double sided tape sold separate or we carry a pre-taped DS9397 frameless shower door seal for easy installation.
- The T-shape is shaped seal is used for shower glass doors that swing in and out.
- The T-shape is also used as a replacement seal
for our DS9371.
The T-shape seal gives
maxium protection.
The image to the left shows the T-shape seal spanding across a large gap between the DS9397 frameless shower door seal and the glass side panel. DS9397 can be used on the front or backside of the door.
Pre-taped $20.99> Regular $18.99>
DS9397 is the replacement
seal for our DS9371 sweep.
The image to the right shows how the DS9397 our T-shape seal slides out of the DS9371 glass shower door sweep. The replacement seal is less expensive and comes in a 32” or 36” length.
Regular $18.99 >
Replacment seal >
Pre-taped $20.99 >
DS9371 shower door sweep >
Waterproof double sided
tape intended for glass.
pFOkUS® waterproof double sided shower door tape has been manufactured to work with the entire line of pFOkUS® seals. The pFOkUS® double sided tape come 36’ long in 1/4” and 1/2” sizes. We recommend to use our pre-taped seals as they are easier to install.
Buy now $23.99 >
Shower glass spot
& etching remover.
Benaz has made removing all the water spots and etching from your shower glass door and enclosure with ease. With a white pad and a little elbow grease your glass will look new in no time at all.
Benaz shower glass polish >
Glass restoration video >
Buy Benaz >
A shower glass sealer
designed just for you.
Shower glass sealants that create a hydrophobic surface (water beads) is not the best sealer to use. Once the water evaporates the minerals are left behind and they create water spots and etch the glass. Valore creates a hydrophilic surface creating the water to sheet off eliminating water dots and etching.
Valore shower glass sealant >
Sealing shower glass video >
Buy Valore >
Questions about DS9397?
Here are our answers.
How do I clean the glass edge before installing the side seal?
Simply use the pFOkUS cleaning pad that is included with every seal. We recommend sealing the glass afterwards with Valore. Glass sealer >
Is the pre-taped seal easier to install than the double side tape?
Most defiantly the pre-taped is easier to install on the shower door.
Pre-taped shower door seals >
How do I cut my sweep to fit my door?
Scissors or a box cutter knife will work just fine.
If calcium build-up is present on my shower door, how do I remove it?
The calcium build-up on your glass can cause issues installing your sweep.
Remove all the calcium with Benaz. Water spot remover >
How long should my seal last?
Depending on hard water and tiles with lippage – most sweeps should be replaced every couple years. Also depending if all oils are removed (with the pFOkUS pad that is included) before installation.
How do I know my glass size?
We have a directions and pictures on how to measure. Glass measuring >
Follow Us!